Fireray 3000 User Manual

6
NOTE: One System Controller can be used to control and monitor up to two Receiver heads. The ‘#’
symbol in this guide is used to represent the number of the Receiver currently selected (1 or 2).
Apply Power to Controller,
Receiver(s) & Transmitter
3 seconds
2. Commissioning
2.1 Apply Power
• Commissioned System:
• Communications fault, or no Receiver connected:
• Receivers are not found (normal at this stage):
• Receivers have been found but not commissioned:

Fireray 3000 Specifications

General

Detection Range	Up to 100m
Operating Temperature	-10°C to +55°C
IP Rating	IP65
Alarm Relay	1A @ 30V DC
Fault Relay	1A @ 30V DC
Detection Principle	Infrared beam
Response Time	10 seconds
Alarm Output	Relay
Current Consumption	≤25mA (standby), ≤45mA (alarm)