English Customer Service: 1-844-FIRMAN1Page
21
start the engine. To manually choke and start the
inverter, follow these steps:
1. Loosen the screws and remove the maintenance
cover.
3. Turn the choke lever to the “CHOKE” (right)
position.
4. Turn the fuel valve
to the “ON”(l)
position.
5. Flip the engine
switch to the
"RUN"(l)
position.
6. Pull the starter cord
slowly until
resistance
is felt and then
pull rapidly.
8. As the engine starts to roll over, move
the choke lever to the “RUN”(left) position.
To Next Page
Loading...
