English Customer Service: 1-844-FIRMAN1Page
22
9. Allow generator to run at no load for few
minutes upon each initial start-up to permit
engine and generator to stablize.
Starting the Generator (Electric Start)
Electric Start and Remote Start Operations
1. Before starting the generator, check for loose
or missing parts and for any damage which
may have occurred during shipment.
2. Check oil level and fuel.
3. Disconnect all electrical loads from the
generator. Never start or stop the generator
with electrical devices plugged in or turned
on.
4. Turn the fuel valve
to the “ON”(l)
position.
5. Flip the engine
switch to the
"RUN"(l) position.
6. Push the battery
power restore
switch for about
3 seconds
and then
release.
7. Push the choke button to the “CHOKE” position.
To Next Page
Loading...
