– 21 –
Security Codes & Authority Levels (cont’d)
ADD NEW USER?
0 = NO , 1 = YES
The system will recognize that the user
number is already in use and will prompt
whether or not this is a new user. Enter 0
to change the existing user's code to the
code entered in step 3.
USER 002 CHANGED
SUCCESSFULLY
The system will confirm that the change is
allowed based on authorization level, and if
so, will put the new code into effect.
Note that if changing one’s own code,
the system will prompt for the new code to
be reentered. This prevents accidentally
changing one's own code.
To Delete a User
1. Enter Master or Manager code and press the 8 key + user
number to be deleted.
2. Enter Master or Manager code first entered.
OK TO DELETE
0 = NO , 1 = YES
The system will recognize that the User
number is already in use and will prompt
to confirm that it should be deleted. Press 0
(NO) or 1 (YES).
USER CODE
DELETED
If yes, that user's code will be removed
from all partitions to which it was
assigned, and all authorization levels and
other information about that user will be
deleted. Note that a user can only be
deleted from the partition in which it was
first assigned, and can only be deleted by a
user with a higher authority level. A User's
security code cannot be deleted by oneself.
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
Need help?
General
