First Alert FA1600C

– 69 –
Quick Guide To System Functions
FUNCTION PROCEDURE COMMENTS
Check Zones Press [✱]. To view faulted zones when system not
ready.
Display All
Descriptors
Press and hold [✱] for 5
seconds.
Displays all alpha descriptors programmed
by installer.
Arm System Enter code.
Press arming key
desired(AWAY, STAY,
INSTANT, MAXIMUM).
Arms system in mode selected.
Disarm System Enter code.
Press OFF [1].
Disarms system and silences alarms.
Bypass zones Enter code.
Press BYPASS [6].
Enter zone numbers to be
bypassed (use 3-digit entries).
Bypassed zones are unprotected and will
not cause an alarm if violated.
Quick Bypass Enter code.
Press BYPASS [6].
Press [#].
Bypasses all faulted zones automatically.
Chime Mode Enter code.
Press CHIME [9].
Keypad will sound if doors or windows are
violated while system disarmed.
Test Mode Enter code.
Press TEST [5].
Sounds alarm sounder and allows sensors
to be tested.
View Messages Press and hold [0] for at least 5
seconds.
Message from central station will appear.
View User
Capabilities
Enter user's code.
Press [✱] + [✱].
Displays partitions & authority levels
assigned to the user.
GOTO Partition Enter security code.
Press [✱].
Enter partition number (1-8).
0 returns to default partition.
Allows a user at one keypad to perform
functions in another partition, if that user
is authorized to do so.
Add a User Enter master/manager code.
Press CODE [8].
Enter new user's user number.
Enter code for that user.
At prompt, enter authority for
that user in this partition (1-5).
Follow prompts, 1=Yes, 0=No.
Master & Manager level users can add
users to the system, each with its own
code and authority level.
Technical Manuals Online! - http://www.tech-man.com