To Next Page

To Previous Page

– 39 –

Viewing Central Station Messages

General Information

Users of the system may periodically receive messages on their

display screens from their monitoring agency or installer. When a

message is waiting to be viewed, the message shown below will

appear.

MESSAGE. PRESS 0

FOR 5 SECS.

1. Press and hold down 0 key for 5 seconds.

2. The message could take up to four screens to display all the

information available.

Technical Manuals Online! - http://www.tech-man.com

Table of Contents2
System Overview4
- General4
- A Partitioned System4
- Zones5
- Fire Protection5
- Burglary Protection5
- Alarms6
- Memory of Alarm6
- Speed Key (Macros)6
- Using Schedules7
- Device Timers7
- To Access Another Partition (GOTO Command)7
- Master Keypad Operation8
- Self-Help Feature8
- Phone Access & Voice Response Capability8
About the Keypads10
- General10
- The Alpha Keypad10
Functions of the Keypad11
Entry/Exit Delays14
- General Information14
Security Codes & Authority Levels15
- General Information15
- Duress Code15
- Quick Arming15
- Authority Levels16
- General Rules on Authority Levels and Changes17
- To Exit User Edit Mode18
- To Add a User18
- Limited Use User(#84 Command)20
- To Change a User's Code20
- To Delete a User21
Accessing Other Partitions22
- To Access Another Partition22
- Global Arming22
- Master Keypad Operation23
- Common Lobby Operation25
- How User Codes Affect the Common Lobby26
Checking for Open Zones28
- Using the READY Key28
Displaying All Zone Descriptors29
- Using the READY Key29
Bypassing Protection Zones30
- Using the 6 BYPASS Key30
- Quick Bypass31
- Displaying Bypassed Zones31
Arming Perimeter Only32
- Using the 3 STAY Key32
Arming Perimeter Only33
- Using the 7 INSTANT Key33
Arming All Protection34
- Using the 2 AWAY Key34
Arming All Protection35
- Using the 4 MAXIMUM Key35
Disarming and Silencing Alarms36
- Using the 1 off Key36
- Memory of Alarm36
Using the Keyswitch37
- General37
- Arming37
- Disarming37
Chime Mode38
- Using the 9 Key38
Viewing Central Station Messages39
- General Information39
Panic Keys40
- Using Panic Keys40
Speed Key (Macros)41
- General Information41
- Defining41
- Executing42
Access Door Control43
- General Information43
- Executing43
Using #70 Relay Menu Mode44
- General Information44
Using Schedules46
- Delaying the Closing Time46
- Temporary Open/Close Schedules46
- Programming Temporary Schedules47
Programming Device Timers50
- General Information50
Event Log Procedures53
- General Information53
- To Display the Event Log53
Event Logging Procedures (Continued)54
Testing the System55
- Using the 5 TEST Key55
- Testing Your System56
Fire Alarm System57
- General57
- In Case of Fire Alarm57
- Silencing a Fire Alarm57
- Fire Display Lock58
- Fire Drill Test (Code + # + 69)58
Trouble Conditions60
- Typical Trouble Displays60
- Power Failure62
Recommendations for Proper Protection63
- Recommendations for Smoke and Heat Detectors63
- Recommendations for Proper Intrusion Protection65
Emergency Evacuation66
Maintaining Your System67
- Taking Care of Your System67
- Replacing Batteries in Wireless Sensors67
- Silencing Low Battery Warning Tones at the Keypad68
- Routine Care68
Quick Guide to System Functions69
Summary of Audible Notification71
Glossary72
Index78
Limited Warranty80

Brand	First Alert
Model	FA1600C
Category	Security System
Language	English

First Alert FA1600C User Manual

Table of Contents

Questions and Answers:

First Alert FA1600C Specifications

Related product manuals