– 45 –
Using #70 Relay Menu Mode (cont’d)
NN DEVICE IS OFF
HIT THE "T" KEY
Voice: "voice descriptor DEVICE nn ON/OFF.
TO EXIT ENTER 00 NOW"
From a keypad, press T to continue. The
ENTER DEVICE NO. prompt will appear.
From a telephone keypad, enter 00 to exit,
or enter the next relay number to be
programmed. The current on/off state of that
relay will be annunciated as described above.
Alternatively, if 6 seconds elapses with no key
depression, the 4285 or 4286 VIP module will
annunciate the "ENTER DEVICE CODE
NOW" message.
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
