Page 50
Channel –select channel of the PTZ
Ch name – give the channel number a name
Main – quality of camera -
CIF or D1 on 4/8 channel
Standard/Net Mode on 16 channel
Minor- low quality of camera-
Select QCIF, CIF or None.
PAL/NTSC –default is NTSC
Audio- turns audio on or off (only works if a mic is installed)
Position - Changes the position of the
date and time and ch. No.
Select Left down, Left up, or None.
Main size- chose the size of
the file for streaming. Size is
by MB/H(megabytes per hour)
Minor size- chose the
lowest number of MB/H
Minor FPS - Choose the frames per
seconded – higher the better
PTZ
Address: Address of the PTZ camera
Protocol: Choose the protocol of the PTZ
NOTE: ONLY compatible with pelco-D
Band Rate chose the band rate of the PTZ
Record task - sets your scheduling recording
Device Logs ScreenPTZ Options Screen
REMOTE ACCESS
CAMERA SETTINGS
To Next Page
Loading...
