Installation Instruction
Page 74 Panda_12mini_PMS_Digital_s00865_Installation manual.V02 - Chapter D: Installation Instruction 23.1.07
D.8 Generator AC System-Installation
ATTENTION! Before the electrical system is installed, READ the “Safety Precautions” on
page vii in this manual FIRST! Be sure that all electrical installations (including all safety
systems) comply with all required regulations of the regional authorities. This includes
lightnening conductor, personal protection switch etc.
D.8.1 Installation AC-Box
Fig. D.32: Installation scheme
A power source selector switch must be installed between the generator (or if applicable,
AC-Control box) and the ship´s electrical supply system. This switch must used to ensure
that all AC consumers can be switched off at once. This switch should also be installed to
keep the generator and shore (grid) power systems separate.
1. Generator
2. Starter battery
3. Fuel level sensor
4. Fuel pump
5. Distribution panel
6. Remote control panel
To Next Page