Installation Instruction
23.1.07 Panda_12mini_PMS_Digital_s00865_Installation manual.V02 - Chapter D: Installation Instruction Page 77
Fig. D.35: VCS board
D.8.4 Current transformer board
For detailed information section E.8, “Scheme current transformer board,” on page XIV.
Fig. D.36: Current transformer board
4
5
8
1
2
3
6
7
1. Terminal for control panel J6
2. Connector for CT board J7
3. Connector for Power supply J5
4. Connector for Digital/binary input J10
5. Connector for Analogue/binary input J4
6. Connector for Analogue/binary input J3
7. Connector for Analogue input J2
8. Connector for Binary output J9
1
2
3
4
5
1. Connector to measuring/compansation board J1
2. Connector L1
3. Connector L2
4. Connector N
5. Booster control output J3
To Next Page