Need help?Do you have a question about the Fischer Panda 6500 PMS and is the answer not in the manual?
General| Frequency | 50 Hz |
|---|---|
| Input Voltage | 12 VDC |
| Voltage | 230 V |
| Output Power | 6500W |
| Protection Features | Overload, overtemperature |
Explains safety symbols used in the manual and on the machine to warn of potential personal injury.
Provides essential safety instructions for operating the generator safely, including PPE and general precautions.
Provides step-by-step instructions for emergency first aid when an adult stops breathing.
Details specific functional units like the remote control panel, cooling, fuel, electrical, sensor, and oil systems.
Directs users to a separate manual for details on generator operation.
Provides advice on base selection and instructions for connecting electrical, fuel, and water lines.
Details the installation of the raw water cooling system, including thru-hull fittings and suction line quality.
Details the installation of the fresh water cooling system, focusing on the expansion tank position and ventilation.
Explains the function and adjustment of the VCS for generator voltage and speed control.
Provides a step-by-step guide for replacing the engine oil and oil filter.
Lists hazard notes relevant to generator faults and troubleshooting procedures.
Provides a table and flowchart to diagnose and resolve common generator faults.
Explains generator overloading, voltage monitoring, auto-shut down, speed governor adjustment, and actuator faults.
Addresses low output voltage, capacitor checks, winding resistance, and no voltage issues.
Covers common engine starting issues like fuel solenoid valve, bypass switch, and lifting solenoid.
Provides safety instructions specific to the Generator Control Panel P6+ and its operation.
Outlines daily checks, starting/stopping procedures, and preparation for generator operation.
To Next Page