Fischer Panda 6500 PMS - Components of the Cooling System (Fresh Water)

The Panda Generator
22.3.11 Panda_6500_7mini_PMS_eng.R01 - Kapitel/Chapter 4: The Panda Generator Seite/Page 47
Fig. 4.3.2-6: Injection raw water Raw Water Injection
Fig. 4.3.2-7: [Raw water output Raw water output
The raw water discharges together with the exhaust.
4.3.3 Components of the Cooling System (Fresh water)
Fig. 4.3.3-1: Exhaust elbow Filler neck (not all models)
The cooling water filler necks situated at the water-cooled
manifold are only used, when the generator is initially started.