Fischer Panda 6500 PMS - 8 Tables; Technical Data

Tables
22.3.11 Panda PMS 8.000 NE - 42 NE Manual.R05 - Kapitel/Chapter 8: Tables Seite/Page 169
8. Tables
8.1 Technical Data
Fig. 8.1-1: Technical Data
² progressive speed by VCS
³ 0,35l/kW electrical power, the randomized values between 30% and 80% of
the rated speed
Fig. 8.1-2: Technical Da
Panda 6000 ND Panda 8000 NE Panda 9000 ND Panda 1000NE Panda 12000 NE
Type Z482 Z482 D722 Z602 D722
Govenor MIni VCS VCS mechanisch VCS VCS
Automatic startbooster nein ja nein ja ja
Cylinder 2 2 3 2 3
Bore 67mm 67mm 67mm 72 mm 67mm
Stroke 68mm 68mm 68mm 73,6 mm 68mm
Stroke volume 479cm³ 479cm³ 719cm³ 599cm³ 719cm³
Max. power (DIN 6271-NB) at 3000rpm 9,32kW 9,32kW 14,0kW 11,6kW 14,0kW
Rated speed 50 Hz 3000rpm 3000rpm 3000rpm 3000rpm 3000rpm
Idle running speed ² 3120rpm 2900rpm 3120rpm 3100rpm 2900rpm
Valve clearance (engine cold) 0,2mm 0,2mm 0,2mm 0,2mm 0,2mm
Cylinder head nut torque 42Nm 42Nm 42Nm 42Nm 42Nm
Compression ratio 23:1 23:1 23:1 24:1 23:1
Lubrication oil capacity 2,8l 2,8l 3,8l 2,8l 3,8l
Fuel consumption ³ ca. 0,5-1,4l ca. 0,7-1,8l ca. 0,8-2,1l ca. 1,0-2,66l ca. 1,1-2,8l
Oil consumption max. 1% of fuel consumption
Cooling water requirement for seawater
circuit (Marine generators only)
16-28l/min 16-28l/min 16-28l/min 16-28l/min 16-28l/min
Permissible max. permanent tilt of engine a) 25° across the longitudinal axis
b) 20° in the longitudinal direction
Panda 14000 NE Panda 15000NE Panda 18 NE Panda 24 NE Panda 30 NE
Type D782 D902 D1105 V1505 V1505 TD
Govenor VCS VCS VCS VCS VCS
Automatic startbooster ja yes yes no no
Cylinder 3 3 3 4 4TD
Bore 67mm 72mm 78mm 78mm 78mm
Stroke 73,6mm 73,6mm 78,4mm 78,4mm 78,4mm
Stroke volume 782cm³ 898cm³ 1123cm³ 1498cm³ 1498cm³
Max. power (DIN 6271-NB) at 3000rpm 13,5kW 17,5kW 18,7kW 23,3kW 31,3kW
Rated speed 50 Hz 3000UpM 3000UpM 3000rpm 3000rpm 3000rpm
Idle running speed ² 2900UpM 2900UpM 2900rpm 2900rpm 2900rpm
Valve clearance (engine cold) 0,2mm 0,2mm 0,2mm 0,2mm 0,2mm
Cylinder head nut torque 68Nm 42mm 68Nm 68Nm 68Nm
Compression ratio 23:1 24:1 22:1 22:1 23:1
Lubrication oil capacity 3,8l 3,7l 5,1l 6,0l 6,7l
Fuel consumption ³ ca. 1,3-3,4l ca. 1,3-3,6l ca. 1,7-4,5l ca. 2,2-5,9 ca. 2,7-7,2l
Oil consumption max. 1% of fuel consumption
Cooling water requirement for seawater
circuit (Marine generators only)
16-28l/min 6-28l/min 28-40l/min 28-40l/min 40-50l/min