Fischer Panda 6500 PMS - Page 170

Tables
Seite/Page 170 Panda PMS 8.000 NE - 42 NE Manual.R05 - Kapitel/Chapter 8: Tables 22.3.11
² progressive speed by VCS
³ 0,35l/kW electrical power, the randomized values between 30% and 80% of
the rated speed
Fig. 8.1-3: Technical data
² progressive speed by VCS
³ 0,35l/kW electrical power, the randomized values between 30% and 80% of
the rated speed
Fig. 8.1-4: Technical Data
Permissible max. permanent tilt of engine a) 25° crosswise to the longitudinal axis
b) 20° in longitudinal direction
Panda 14000 NE Panda 15000NE Panda 18 NE Panda 24 NE Panda 30 NE
Panda 45LN
Type LDW 2204 MT
Govenor VCS
Automatic startbooster no
Cylinder 4
Bore 88 mm
Stroke 90,4 mm
Stroke volume 2199 ccm
Max. power (DIN 6271-NB) at 3000rpm 47 kW
Rated speed 50 Hz 3000 rpm
Idle running speed ² 3000 rpm
Valve clearance (engine cold) 0,2 mm
Cylinder head nut torque 68 Nm
Compression ratio 22:16
Lubrication oil capacity 6,4l
Fuel consumption ³ ca. 4,9-13,1l
Oil consumption max. 1% of fuel consumption
Cooling water requirement for seawater
circuit (Marine generators only)
40-50l/min
Permissible max. permanent tilt of engine a) 25° crosswise to the longitudinal axis
b) 20° in longitudinal direction
Panda 30/4 Panda 40/4 Panda 50/4
Type V3600 V3600 V3800 DI-T
Govenor VCS VCS Mechanical +
GAC
Automatic startbooster no no no
Cylinder 4 4 4
Bore 98 mm 98 mm 100 mm
Stroke 120 mm 120 mm 120 mm
Stroke volume 3620 ccm 3620 ccm 3769 ccm
Max. power (DIN 6271-NB) at 3000rpm 45,8 kW 58,8 kW 62,0 kW
Rated speed 50 Hz 1500 rpm 1500 rpm 1500 rpm
Idle running speed ² 2800 rpm 2800 rpm 1800 rpm
Valve clearance (engine cold) 0,2 mm 0,2 mm 0,2 mm
Cylinder head nut torque 68 Nm 68 Nm 68 Nm
Compression ratio 22,6:1 22,6:1 19,0:1
Lubrication oil capacity 13,2 l 13,2 l 13,2 l
Fuel consumption ³ ca. 3,15-8,4 l ca. 3,78-10,1 l 4,2-11,2 l
Oil consumption max. 1% of fuel consumption