To Next Page

To Previous Page

ROBOTICS TXT 4.0 CONTROLLER

schertechnik TXT Operating manual_EN | 10. November 2021, 9:18 PM

SOFTWARE REQUIREMENTS

Software requirements for the ROBOTICS TXT 4.0 Controller:

› schertechnik programming environment ROBO Pro Coding (Windows10 / Mac OS / Linux / iOS / Android)

available for free from relevant app stores.

› Python

› C/C++

SUPPLY THE CONTROLLER WITH POWER

There are two options for doing so:

› Connect the Battery Pack to the “9V IN” connections – see number 6 in the section “Overview of connections.”

This connection allows for a mobile power supply via the schertechnik Battery Pack (not included in the scope

of delivery).

› Connect the 9V DC/2.3-2.5A power supply to the “9V IN” DC port – see number 5 in the section “Overview of

connections.”

In this case, the power supply from the Power Set is connected (not included in the scope of delivery).

SWITCHING THE CONTROLLER ON AND OFF

SWITCH ON PROCESS

To activate the Controller, press the ON/OFF button (11) and hold it down for approx. 4 seconds until the display

lights up – see number 11 in the section “Overview of connections.” Once the boot process is completed (indicated

by a loading bar shown on the display), the main menu will appear.

After the initial boot process, the user must select their desired language using the touch screen (the default

setting is English):

To change languages:

1. Touch Settings | Language,

2. Touch the desired language

3. Press the button to return to the main menu

fischertechnik ROBOTICS TXT 4.0 User Manual

Questions and Answers: