fischertechnik ROBOTICS TXT 4.0 - Setting the Controller; Menu Overview

© Copyright 2001-2021 schertechnik GmbH | Klaus-Fischer-Straße 1 | 72178 Waldachtal
12
ROBOTICS TXT 4.0 CONTROLLER
schertechnik TXT Operating manual_EN | 10. November 2021, 9:18 PM
SWITCH OFF PROCESS
To deactivate the Controller, press and hold the ON/OFF button (11) for approx. 3 seconds, until the button is
illuminated red. Now, release the ON/OFF button and the Controller will be switched off.
After switching off the Controller, unplug the power supply from the outlet.
SETTING THE CONTROLLER
The following subsections describe the Controller menu and its setting options in detail.
MENU OVERVIEW