3030
4
Insert the spring clip into the gap between the side trim and side trim bracket,
orientation as shown in figures (D) and (E).
IMPORTANT!
Ensure spring clip is correctly oriented with the open loop facing the side trim lip.
Repeat this process for the remaining side trim.
5
Open refrigerator doors. Place the assembled side trim with brackets and spring clips
against the alcove side wall with the shorter lip facing the bottom (F).
IMPORTANT!
Ensure the side trim is positioned as high as it will go.
Push the side trim at each bracket location until there are no visible gaps between
thetrim and cabinetry (G).
Repeat this process for the remaining side trim.
Spring clip
Side trim lip
D
Top view of spring clip correctly inserted
between side trim and side trim bracket
E
G
F
@4 ATTACH SIDE TRIM BRACKETS – [A] FLEXIBLE SPRING CLIP METHOD
To Next Page
Loading...
