819091D
50
12.3 DOOR AND DOOR GASKET
Door Gasket - (Integral)
Integrally foamed doors with the outer door panel and inner door liner foamed as one unit are becoming more
common for manufacturers. This means that only the door gasket can be replaced as a separate part.
All replacement doors are supplied minus the door gasket. The door gasket is a replaceable part of the door.
It is held in place against the door liner by means of a moulding that locks the gasket in place once pushed
into it. There are no screws or retainers to remove or fit.
To Remove the Gasket
Pull on any section of the gasket to pull it away from the moulding.
To Replace the Gasket
Having removed the old gasket, lay the new gasket around the door gasket moulding. First fit all corners, then
push the remaining gasket into place around the door.
To Next Page
Loading...
