B
Belinda WestJul 27, 2025
Why does my Fisher Research Labs Metal Detector chatter or beep erratically?
- EEdward HumphreyJul 27, 2025
If your Fisher Research Labs Metal Detector chatters, beeps erratically, or has low sensitivity, it could be due to several factors. First, make sure you are using the detector outdoors. Using it indoors can cause interference. Also, move away from power lines. If you are using two detectors, keep them at least 6 meters (20’) apart. Finally, environmental electromagnetic interference may be the cause. In this case, reduce the sensitivity until the erratic signals cease.