Need help?Do you have a question about the Fisher Research Labs M-Scope Series and is the answer not in the manual?
How the M-Scope detects subjects using light beams and signal strength.
Measures subject speed, triggers alarms for "Speed Violation!".
Alarm mode for blocked light beams, aids in sensor troubleshooting.
Normal detection state, zone/ready lights green, status yellow.
Explains zone lights (red, yellow, green) and alarm thresholds.
Alarm triggered when a key is held down, shows stuck key status.
Procedure to properly shut down the M-Scope unit.
Alerts for low battery and methods to recharge.
Discusses how interference affects operation and how to mitigate it.
Adjusts alarm length, pattern, and volume.
Sets the unit's sensitivity to detect metal objects.
Adjusts sensitivity for individual zones (top, middle, bottom).
Adjusts the LCD display contrast.
Views and resets counters for people, metal, speed, and access.
Sets speed limits for "Speed Violation!" alarms.
Mode to count people entering only, ignoring exits.
Manages password protection for settings and access codes.
Factory default high sensitivity settings.
User Preset 1 settings.
User Preset 2 settings.
User Preset 3 settings.
Physical size specifications of the M-Scope.
Size specifications for the portable configuration.
Specifies the weight of the M-Scope unit.
Details temperature and humidity operating limits.
Information on battery life and AC power options.
Terms and duration of the product warranty.
General| Brand | Fisher Research Labs |
|---|---|
| Model | M-Scope Series |
| Category | Metal Detector |
| Language | English |
To Next Page