To Next PageTo Next Page
Need help?Do you have a question about the Fisher Research Labs Gold Bug-2 and is the answer not in the manual?
Highlights the Gold Bug-2's high frequency, mineralization switch, and iron discrimination.
Explains audio boost, dust resistance, hipmounting, and lightweight design.
Details unpacking, stem, coil angle, and cable connection steps.
Guides on leaning, arm position, and coil height for optimal searching posture.
Explains how to detach and strap the control housing to the waist for easier handling.
Explains the sensitivity knob and its function as a battery tester.
Describes the toggle switches for operating modes and mineralization settings.
Covers the volume control and headphone jack for audio output.
Details NORMAL, AUDIO BOOST, and IRON DISC modes and their uses.
Explains LOW, NORMAL, and HIGH mineralization settings for different ground conditions.
Illustrates how sensitivity and mineralized soil performance vary with switch combinations.
Provides guidance on setting the mineralization switch based on ground conditions and 'ground chatter'.
Details the specific uses and benefits of IRON DISC and AUDIO BOOST modes.
Specifies the recommended starting settings for MODE, MINERALIZATION, SENS, GROUND REJECT, and VOLUME.
Guides on holding the coil and adjusting the threshold tone for optimal operation.
Explains the goal of ground balancing for minimal response to ground minerals.
Provides step-by-step instructions for adjusting the GROUND REJECT control.
Details fine-tuning adjustments and offers solutions for ground balancing issues.
Emphasizes coil movement, overlap, and keeping the coil close to the ground.
Offers solutions for ground chatter by adjusting sensitivity and mineralization settings.
Provides guidance for hunting in areas with extreme mineralization using HIGH setting.
Details steps to narrow the search coil sweep to locate the strongest signal.
Guides on identifying the precise spot of the target for recovery.
Emphasizes neat and quick excavation, leaving no trace of the site.
Explains how to retrieve the target using the search coil and hand.
Details the sprinkle method for identifying very small targets in dirt samples.
Explains how hot rocks and mineralized soil cause false signals and their solutions.
Discusses false signals from junk items and digging tool interference.
Reiterates key tips like taking time, overlapping sweeps, and checking ground adjustment.
Advises practicing with targets and researching promising search locations.
Details how to open the compartment, insert batteries, and secure the door latch.
Covers battery removal, temperature avoidance, coil protection, and cleaning.
Outlines ethical guidelines for metal detecting, including respecting laws and property.
Details rules for metal detecting on Federal, State, City, and private lands.
Lists physical dimensions, frequency, operating modes, and mineralization settings.
Details ground adjustment, audio output, and search coil specifications.
Covers shielding, waterproofing, cable length, mounting, and battery life.
Outlines warranty coverage, limitations, and the procedure for making a claim.
General| Operating Frequency | 71 kHz |
|---|---|
| Ground Balance | Manual |
| Sensitivity Control | Yes |
| Discrimination Control | Yes |
| Warranty | 5 Years Limited |
| Type | VLF (Very Low Frequency) |
| Intended Use | Gold Prospecting |
| Weight | 2.5 lbs |
| Battery Type | 9V Alkaline |
| Audio Output | Speaker & Headphone Jack |
| Search Coil | 6.5" Elliptical |
