8
1. Adjust the stem length as short as you can without
having the search coil detect your diving gear.
2. Adjust the search coil parallel to the sea bed,
river or lake bottom.
3. Make sure extra cable is coiled tightly on the
upper stem as closely as possible to the control
housing, with just enough slack near the search coil
to allow it to swivel as far as it can in either direction.
Too much loose cable near the search coil may
generate false signals.
4. Remove the tethered earphone plugs for rapid
pressure equalization as you dive and return to the
surface.
Caution: Hipmounting the CZ-20 control housing is not
recommended for underwater use. The search coil cable may
become entangled with a submerged object, making it difficult
for the diver to resurface quickly in case of emergency.
SETTING UP FOR HIPMOUNTING
For almost-effortless treasure hunting, the control housing is easily
removed from the handle and attached to a belt clip.
SETTING UP
You can hipmount your CZ-20 by sliding the control housing from the
handle and attaching it to your belt. This reduces the weight of the
stem, creating nearly effortless hunting.
To Next Page
Loading...
Need help?
General
