Instruction Manual
D101554X012
Vee-Ball Valves
June 2017
39
Parts Ordering
A serial number is assigned to each valve and stamped on the nameplate. Always refer to the valve serial number when
corresponding with your Emerson sales office
or Local Business Partner regarding spare parts or technical information.
When ordering replacement parts, also specify the key number, part name, and desired material using the parts list.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher valve, because they will void your warranty, might adversely affect the
performance of the valve, and could give rise to personal injury and property damage.
Note
For the NPS 2 V150 valve, this manual covers valves with serial numbers 12551183 and higher. Always reference the serial number
of your valve when corresponding with your Emerson sales office or Local Business Partner.
Retrofit Kits for ENVIRO‐SEAL Packing
Retrofit kits include parts to convert existing V150, V200 and V300 valves with shallow (single packing depth) packing
box to the ENVIRO‐SEAL packing box construction. Retrofit kits include single PTFE packing. See following table.
ENVIRO‐SEAL Packing Retrofit Kits
SHAFT DIAMETER
(1)
PART NUMBER
mm Inches Single PTFE Graphite
12.7 1/2 RRTYXRT0012 RRTYXRT0312
15.9 5/8 RRTYXRT0022 RRTYXRT0322
19.1 3/4 RRTYXRT0032 RRTYXRT0332
25.4 1 RRTYXRT0052 RRTYXRT0352
31.8 1‐1/4 RRTYXRT0062 RRTYXRT0362
38.1 1‐1/2 RRTYXRT0072 RRTYXRT0372
Parts Included in Kit
Key Description Quantity
100 Packing stud 2 2
101 Packing nut 2 2
102 Packing flange 1 1
103 Spring pack assembly 1 1
105 Packing set 1 1
106 Anti-extrusion washer 2 ‐ ‐ ‐
107 Packing box ring
(2)
1 1
‐ ‐ ‐ Tag 1 1
‐ ‐ ‐ Tie Cable 1 1
1. Diameter through the packing box.
2. Not required for all sizes of V150 and V200 or for V300 with 1‐1/4 or 1‐1/2 inch diameter shafts.
To Next Page
Loading...
