Fisher Vee-Ball V150 - User Manual

www.Fisher.com
Fisher
™
Vee‐Ball
™
V150, V200 and V300 Rotary
Control Valves NPS 1 through 12
Contents
Introduction 1.................................
Scope of Manual 1.............................
Description 2.................................
Specifications 2...............................
Educational Services 2
..........................
Installation 3....................................
Maintenance 9..................................
Packing Maintenance 9.........................
Replacing the Ball Seal 11.......................
Disassembly 11............................
Assembly 14..............................
HD Ball Seal Lubrication 20..................
Bearing and Ball Maintenance 20.................
DN 80 - 300 (NPS 3 - 12) valves 20................
Welded Taper Key Replacement 24...........
DN 25 - 50 (NPS 1 - 2) valves 25..................
Actuator Mounting 32
............................
NPS 3 through 12 without Attenuator 32...........
Determining Mounting Position 33...............
Determining Closed Position 33.................
Parts Ordering 39
................................
Parts Kits 40.....................................
Parts List 41.....................................
Appendix A Instructions for Non‐Series B 42.........
Figure 1. Fisher Vee‐Ball with 2052 Actuator
and FIELDVUE
™
DVC6200 Digital Valve Controller
X0187
Introduction
Scope of Manual
This instruction manual provides installation, operation, maintenance, and parts information for the Fisher Vee‐Ball
V150 (NPS 1 through 12), V200 (NPS 1 through 10), and V300 (NPS 1 through 12) rotary control valves (see figure 1).
NPS 3 through 12 valves without an attenuator currently in production are referred to as Series B (for more
information on this distinction see Appendix A).
For larger valves (NPS 14, 16, and 20), refer to a separate instruction manual. For information on ENVIRO‐SEAL
™
packing, see the ENVIRO‐SEAL Packing System for Rotary Valves instruction manual (D101643X012). Refer to separate
manuals for information concerning the actuator, positioner and accessories.
Do not install, operate, or maintain Vee-Ball valves without being fully trained and qualified in valve, actuator, and
accessory installation, operation, and maintenance. To avoid personal injury or property damage, it is important to
carefully read, understand, and follow all the contents of this manual, including all safety cautions and warnings. If you
have any questions about these instructions, contact your Emerson sales office
or Local Business Partner before
proceeding.
Instruction Manual
D101554X012
Vee-Ball Valves
June 2017

Summary

Introduction to Vee-Ball Valves

Scope of Manual

Overview of the manual's scope for specific Vee-Ball valve models.

Valve Description

General description of Vee-Ball valves and their applications.

Valve Specifications

Details technical specifications for Vee-Ball valves.

Educational Services for Valve Training

Information on available training courses for Fisher Vee-Ball valves.

Vee-Ball Valve Installation

Installing Vee-Ball Valves

Procedures for installing Vee-Ball valves, including specific models.

Vee-Ball Valve Maintenance

Packing Maintenance and Replacement

Procedures for packing maintenance and replacement.

Vee-Ball Valve Disassembly

General Disassembly Procedures

Steps for taking apart Vee-Ball valves for maintenance.

Vee-Ball Valve Assembly

Ball Seal Replacement and Assembly

Procedures for replacing and assembling ball seals.

Vee-Ball Ball Seal Installation

Installing Flat Metal and HD Ball Seals

Procedures for installing various ball seal types.

Vee-Ball Bearing and Ball Maintenance

HD Ball Seal Lubrication and Bearing Procedures

Lubrication and maintenance for HD ball seals and bearings.

Vee-Ball Drive Shaft Installation

Taper Key and Drive Shaft Procedures

Steps for installing taper keys and drive shafts.

Small Valve Procedures (NPS 1-2)

Disassembly and Assembly for NPS 1-2 Valves

Specific disassembly and assembly for smaller valve sizes.

Actuator Mounting and Adjustment

Mounting Position and Closed Position Determination

Guidance on actuator mounting and setting valve closed position.

Parts Ordering and Kits

ENVIRO-SEAL Packing and Ball Seal Repair Kits

Information on retrofit and repair kits for packing and ball seals.

Vee-Ball Parts List

Common Parts and ENVIRO-SEAL System Parts

Lists of common parts and ENVIRO-SEAL system components.

Appendix A: Non-Series B Valves

Maintenance and Disassembly for Non-Series B Valves

Specific maintenance and disassembly for non-series B valves.

Fisher Vee-Ball V150 Specifications

General

Brand	Fisher
Model	Vee-Ball V150
Category	Control Unit
Language	English