FläktGroup ECONET - Page 6

LIQUID-COUPLED HEAT EXCHANGER ECONET
®
Installation & Maintenance Manual
6
FläktGroup DC_9010GB 20180327_R0 Specifications are subject to alteration without notice
ECONET
®
SCOPE OF DELIVERY
Controls and components
The liquid flow in the ECONET
®
circuit is controlled by the
frequency inverter for the pump. The frequency inverter is
equipped with software that optimizes the circulation flow
in the circuit for each operating condition. The software
includes protection and alarm functions.
The frequency inverter is Modbus compatible. Modbus
communication is intrinsic to the controller. The frequency
inverter is mounted on the pump unit and is programmed
with input data for the specific project.
Necessary components such as pressure and temperature
sensors for the pump unit are included. Components within
the scope of the delivery are installed, and cables are routed
to the ECONET
®
the frequency inverter.
PACKAGING
Suitable packaging protects the ECONET
®
unit during transport.
This is fully environmentally compatible, and should be taken
for central disposal as a secondary raw material.
COMMISSIONING
In order to guarantee safe and optional functionality for
ECONET
®
heat recovery, commissioning of each ECONET
®
system shall be carried out by accredited and trained per-
sonnel. Commissioning of ECONET
®
can be ordered and
carried out via the FläktGroup sales organisation, see
order code.