35
English
* What is pre-brewing?
When the pump begins working, there is a short pause. During that pause, the ground
coee in the brewing group is moistened with a small amount of water before complete
extracon. This process expands the ground coee inside the brewing group, which
increases water retenon and pressure to help extract all of the oils and avor from the
ground beans.
Mode selecon - indicave table
Espresso buon Long buon Hot water buon
Default Flashing light Steady light Flashing light
ECO mode Flashing light Flashing light Steady light
Quick mode Steady light Flashing light Flashing light
To select a mode:
- With the machine in STANDBY mode, press
the ON/OFF buon for 5 seconds unl the
buon begins ashing.
- Release the ON/OFF buon.
- The ON/OFF buon will remain ashing
and the espresso, long and hot water
buons will give a series of indicaons,
according to the table above.
- To change the mode, press the hot water
buon for ECO mode, the espresso buon
for quick mode and the long buon for
the default sengs. You will hear 2 beeps,
indicang that the mode has been selected.
- If you wish to keep the current sengs
and not make changes, press the ON/OFF
buon again or wait 5 seconds unl the
machine returns to STANDBY mode.
CLEANING AND MAINTENANCE
Automac cleaning/descaling
When the descaling indicator symbol is lit,
this means that automac cleaning should
be performed. The machine will remain in
top condion if this funcon is performed at
least once per month, or more frequently,
depending on the hardness of the water
used.
IMPORTANT: The complete descaling
process will take approximately 30
minutes. For your safety, do not turn o
the machine during the process. If the
descaling process is interrupted, it should
be restarted from the beginning.
- Completely ll the water tank.
- Add the contents of the descaling packet
included in the box to the water tank.
IMPORTANT: Do not use vinegar or any
other cleaning agent to perform automac
cleaning of this appliance. Cleaning agents