CONTENTS
Section 1 Information and Requirements PAGE
1.0 Appliance Information 3
1.1 Conditions of Installation 4
1.2 Flue and chimney suitability 4
1.3 Fireplace / surround suitability 5
1.4 Shelf position 5
1.5 Chimney inspection 5
1.6 Fire place opening / catchment space 6-7
1.7 Fitting to Chair bricks 8
1.8 Precast Flues 8
1.9 Metal Flue boxes 8
1.10 Hearths 9
1.11 Spillage Monitoring System 9
Section 2 Installation of Fire
2.1 Unpacking the fire 10
2.2 Installing the fire box 10
2.3 Gas tightness and burner pressure 15-16
Section 3 Assembling Fuel Bed and Commissioning
3.1 Assembling the ceramics and fuel bed (Coal models) 16-18
3.2 Assembling the ceramics and fuelbed (Pebble models) 18-19
3.3 Assembling the ceramics and fuelbed (Driftwood models) 20-25
3.4 Fitting the Trim 26
3.5 Fitting the Fret 26
3.6 Lighting the appliance 27
3.7 Checking for clearance of combustion 27-28
products
Section 4 Maintenance
4.1 Removal of the Burner Assembly 29
4.2 Removal of the Piezo Igniter 29
4.3 Removal of the Control Tap 30
4.4 Removal of the Thermocouple 30
Section 5 User Instructions Section
5.1 Conditions of Installation / About Your New Gas Fire 31-32
5.2 Operating the Fire 33
5.3 Assembling the Coal Fuelbed 34-35
5.4 Assembling the Pebble Fuelbed 36-37
5.5 Assembling the Driftwood Fuelbed 38-43
5.6 Cleaning the Fire 44
This appliance is manufactured by :-
CFM Europe Ltd.
Trentham Lakes,
Stoke-on-Trent,
ST4 4TJ
2
To Next Page
Loading...
