PAGE 3Help: 888-426-5001 QualityWaterForLess.com
›taBle oF Contents
Page 2 Meter Control Valve Ports and Programming Reference (Click to Jump to Page)
Page 3 Table of Contents
Page 4 Calculating your Hardness Level and Salt Grid Table
Page 5 Tank Size, Hardness, Unit Capacity, Salt Setting, and Salt Grid Table
Page 6 Pre-Installation and Filling the Tank
Page 7 Installing the Fleck 5600 SXT Valve onto the Tank
Page 8 Plumbing the Fleck 5600 SXT Valve into your Home
Page 9 Making the Brine Tank Connection
Page 10 Making the Drain Connection
› PReFaCe
Thank you for your purchase of a new water softener with Fleck 5600 SXT Meter Control Valve from
QualityWaterForLess.com! We have put together these instructions as reference and to be used as
general installation guidelines.
It is always recommended that a licensed plumber perform all instal-
lation work according to all local codes.
We at QualityWaterForLess.com cannot assume responsibil-
ity for improper installation, application, or injury or damage as a result of improper installation.
Page 11
Programming: Entering Master Programming Mode and Initial Programming
Page 12 Programming: Number of Tanks, Capacity, Hardness, Reserve, Day Override
Page 13 Programming: Regeneration Time, Backwash, Brine Draw, Rapid Rinse,
Brine Fill, and Meter Type
Page 14 Programming: Resetting the Time; Initial System Start-Up
To Next Page
Loading...
