PAGE 5Help: 888-426-5001 QualityWaterForLess.com
Tank Size
HARDNESS
UNIT
CAPACITY
LBS OF SALT
11x11” Grid 15x17” Grid 18x33” Grid 18x40” Grid 24x41” Grid 24x50” Grid
24K
0.75 cu ft
8x44”
0 - 12 gpg 15K 4.5 lbs Grid NO GRID NO GRID NO GRID
TOO
LARGE
TOO
LARGE
12 - 25 gpg 20K 7.5 lbs Grid Grid NO GRID NO GRID
25+ gpg 24K 11.25 lbs Grid + 3” Legs Grid Grid Grid
32K
1.0 cu ft
9x48”
0 - 12 gpg 20K 6 lbs Grid NO GRID NO GRID NO GRID
TOO
LARGE
TOO
LARGE
12 - 25 gpg 27K 10 lbs Grid + 3” Legs Grid Grid Grid
25+ gpg 32K 15 lbs Grid + 6” Legs Grid + 3” Legs Grid Grid
40K
1.25 cu ft
10x44”
0 - 12 gpg 25K 7.5 lbs Grid Grid NO GRID NO GRID
TOO
LARGE
TOO
LARGE
12 - 25 gpg 34K 12.5 lbs Grid + 3” Legs Grid Grid Grid
25+ gpg 40K 18.75 lbs TOO SMALL Grid + 3” Legs Grid + 3” Legs Grid + 3” Legs
48K
1.5 cu ft
10x48”
0 - 12 gpg 30K 9 lbs Grid + 3” Legs Grid Grid Grid
TOO
LARGE
TOO
LARGE
12 - 25 gpg 41K 15 lbs Grid + 6” Legs Grid + 3” Legs Grid Grid
25+ gpg 48K 22.5 lbs TOO SMALL Grid + 6” Legs Grid + 3” Legs Grid + 3” Legs
64K
2.0 cu ft
12x52”
0 - 12 gpg 40K 12 lbs Grid + 3” Legs Grid Grid Grid
Grid +
5” Legs
Grid +
5” Legs
12 - 25 gpg 54K 20 lbs TOO SMALL Grid + 6” Legs Grid + 3” Legs Grid + 3” Legs
25+ gpg 64K 30 lbs TOO SMALL TOO SMALL Grid + 6” Legs Grid + 6” Legs
5)
UNIT CAPACITY:
The Unit Capacity equates to your system's rated capacity based on your tank size and
hardness level. In the first column, identify the
section
containing your softener tank size and then within this
section, find the
row
pertaining to your
Hardness
level. Then look under the
Unit Capacity
column to find the
most efficient program value to use for your
Unit Capacity
and record it
in the table on page 2.
Note that
your Unit Capacity program value may actually be lower than the tank’s maximum capacity.
This is to
accommodate a lower salt dose for regeneration.
6)
LBS OF SALT:
In the first column, identify the
section
containing your softener tank size and then within this sec-
tion, find the
row
pertaining to your
Hardness
level. Then look under the
lbs of Salt
column to find the most efficient
program value to enter for your
lbs of Salt
per regeneration and record it
in the table on page 2.
7)
Example:
If you ordered a 64K grain capacity system and have 28 gpg hardness, you would look under the 64K, 2.0
cu ft section and then look under the 25+ gpg row for your particular programming values. Note that the 11x11” and the
15x17” brine tanks are too small for the amount of brine needed to regenerate a 64K grain capacity system with 25+ gpg
hardness. According to the table you would opt for an 18” diameter brine tank with a grid plus 6” legs
To Next Page
Loading...
