Fleck 7700 - Page 2

1 - VALVE SPECIFICATION
7700 VALVE
2
Installation N°
Valve serial N°
Tank size
Resin type
Resin volume
Time clock
Meter delayed
Meter immediate
System capacity m
3
°tH
Inlet water hardness °tH
Water hardness after mixing valve °tH
Brine tank size L
Quantity of salt per regeneration Kg
VALVE TECHNICAL CHARACTERISTICS
REGENERATION CYCLE SETTINGS
INITIATION
Days/ litres
2 A.M.
or
REGENERATION REGLEE
REGENERATION TIME
Cycle 1 (Fltr) (dF) (dFFF) Min.
HYDRAULIC SETTINGS
VOLTAGE
Injector size
Cycle 2 (Fltr) (dF) (dFFF) Min.
Cycle 3 (dF) (dFFF) Min.
Cycle 4 (df) (dFFF) Min.
Drain line flow control (DLFC) GPM
Brine line flow control (BLFC) GPM
NOTES
Cycle 5 (df) (dFFF) Min.
Cycle 6 (dFFF) Min.
24V/50Hz
24V/60Hz without transformer
8P Vanne 7700 ANG 8/03/05 19:37 Page 2