EasyManua.ls Logo

Fleetwood Bounder - Interior STORAGE; Interior and Furnis~Ings; Dinette Conversion

Fleetwood Bounder
126 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LiviNq
WiTh
YOUR
MOTOR
HOME
The closets and some cabinets have friction catches along
one edge
of
the door. Overhead doors may have supports
to
hold them open.
Drawers rest in notches when they are closed.
To
open draw-
ers, lift up slightly, then pull open.
Closets may be equipped with 12-volt lights that may be
switched to turn
ON when the closet door is opened. Be sure
the light goes
OFF when the closet door is closed your bat-
tery will be discharged
if
it stays ON.
If
the light stays on
when the door is closed, the door switch requires adjustment.
The same loading considerations apply
to
interior storage
areas as to exterior. Consult the
Motor Home Loading sec-
tion in the
On The Road chapter.
The materials used inside your motor home have been select-
ed for durability and comfort. With reasonable care, these
materials will stand up under years
of
recreational living.
The
Maintenance chapter in this manual outlines care
requirements for the various upholstery fabrics, floor, cabi-
net, and wall finishes.
To
convert the dinette into a bed:
1.
Unfasten and remove cushions.
2.
Reach under the table, remove leg.
3.
Raise front portion of table several inches to disengage
inserts from the
wall supports.
4.
Lower table top to the dinette frame to complete bed base.
5.
Slide seat and back cushion into place over bed base.
BOUNdEfI
INTERIOR
STORAGE
INTERIOR
AND
FURNISHINCS
DINETTE
CONVERSION

Table of Contents

Other manuals for Fleetwood Bounder

Related product manuals