o
o
o
01
o
o
o
Turn the water pump master switch ON.
Open
each cold water faucet, run the water pump and
let about a cup
of
antifreeze solution flow continuously
through each faucet. Close each cold water faucet.
Flush the toilet until the antifreeze solution flows
con-
tinuously. Release flush mechanism.
Winterize the water heater according
to
the instructions
provided with the water heater operating manual.
Winterize the hot water lines by opening each hot
water faucet, allowing antifreeze solution to flow
con-
tinuously, and then close each faucet. This will require
considerably more antifreeze solution, and you may
choose to do this step before winterizing the cold water
lines so you can recycle the solution.
When filling the plumbing systems with antifreeze, be
sure to open and operate all fixtures and valves
allow-
ing the antifreeze solution to flow freely.
Pour one cup
of
antifreeze solution down each drain.
Install all protective caps:
Water tank fill
City water Inlet cap
Waste tank drain
outlet cap
PACE
Annow
STORACjE
NOTE
A bypass valve (see
Plumbing chapter) allows
the
user
to
bypass
the
water heater - allowing it
to
be
drained -
to
reduce
the
amount
of
antifreeze
required
to
winterize
the
fresh
water system.
~.-.-.-
1-
.~-
To Next Page
Loading...
Need help?
General
