Page 16 of 18
Shipping Information:
Cleaning Machine After Installation:
To prevent rust during shipping, all exposed machined surfaces are coated with antirust
oil. This coating and any dust or foreign particles accumulated during shipment could
prematurely deteriorate sliding surfaces in the machine unless they are removed before
putting the machine into operation.
Do not move machine table, slide, head or any other moving part supplied with the
machine (indexing device, etc.) before thoroughly cleaning and lubricating all sliding
surfaces. First clean all exposed surfaces of the linear guides with kerosene
(IMPORTANT: Never use corrosive solvents or any other product that could attack
painted or machined surfaces) and then lubricate with linear guide oil.
To Next Page
Loading...
Need help?
General