Page 3 of 18
Introduction:
The purpose of this manual is to describe the procedures for the installation and
maintenance of the FlexCNC C-Series milling machine.
The operator or person responsible for the operation of this machine should carefully
read this manual in order to be familiar with the different parts of the machine.
At the time this manual was prepared, assembly drawing, part numbers and the
descriptions of the various operations, coincided with the characteristics and operation
mode of the machine. However, because of the continuous effort of our company to
improve the performance and reliability of our machines, some changes may be made in
the design and characteristics of your machine, reserving the right of making changes
without previous notice.
This manual is the property of FlexCNC and is solely intended for exclusive use by our
agents or customers and shall not be disclosed to third parties without previous notice.
To Next Page
Loading...
Need help?
General