Flex XFE 15 18.0-EC User Manual

Instruction manual XFE 15 18.0-EC / XCE 8 18.0-EC
8
Your risk from these exposures varies,
depending upon how often you do this type of
work. To reduce your exposure to these
chemicals:
– Work in a well-ventilated area.
– Work with approved safety equipment,
such as dust masks that are specially
designed to filter out microscopic particles.
– Avoid prolonged contact with dust from
power sanding, sawing, grinding, drilling,
and other construction activities. Wear
protective clothing and wash exposed
areas with soap and water. Allowing dust
to get into your mouth or eyes or to lie on
the skin may promote absorption of
harmful chemicals.
5. Definitions for symbols used on
this tool
SAVE THESE INSTRUCTIONS AND MAKE THEM AVAILABLE
TO OTHER USERS AND OWNERS OF THIS TOOL!
Technical specifications
Vvolts
r.p.m. Rotation rate
Before switching on the power
tool, read the operating manual!
Wear eye protection!
XFE 15 18.0-EC XCE 8 18.0-EC
Machine type Orbital polisher
Tool holder mm (in)
Velcro Ø 125 (5) /
150 (6)
Velcro Ø 125 (5)
Tool Ø max. mm (in) 160 (6.5)
Orbit mm (in) 15 (0.59) 8 (0.32)
Orbit rate r.p.m. 4,600-7,600 280-430
Weight according to “EPTA
Procedure 01/2003”
(without battery)
kg (lbs) 2.1 (4.63) 2.15 (4.74)

Flex XFE 15 18.0-EC Specifications

General

Battery Voltage	18 V
No Load Speed	3, 000 - 10, 000 opm
Weight	3.5 lbs
Dust Extraction	Yes
Max. disc diameter	6 in (150 mm)
Pad Size	6 in (150 mm)
Orbit	2.5 mm