FLUXUS F808, F809 14 Libraries
136 UMFLUXUS_F808_8091V1-2-1EN, 2019-08-23
Fluid parameters
Enter the fluid's:
• longitudinal sound speed
• kinematic viscosity
• density
Depending on the selected function, 1...5 values have to be entered. Press ENTER after each input.
If an already defined fluid is edited, for each parameter of some of the functions there will be a request whether it is to be
edited. Select yes or no. Press ENTER. Change the values, if necessary.
14.4 Deleting a user defined material/fluid
To delete a user defined material/fluid, proceed as follows:
Select Special Funct.\Install Material or Install Medium. Press ENTER.
If the extended library is activated, press ENTER until the request for deleting is displayed.
14.5 Arrangement of the material/fluid scroll list
The materials and fluids to be displayed in the program branch Parameter are arranged in the material scroll list and in
the fluid scroll list.
Select yes to store the entered parameters or no to quit the menu item without storing.
Press ENTER.
Select yes to store the entered parameters, no to quit the menu item without storing. Press
ENTER.
Select delete. Press ENTER.
Select the material/fluid to be deleted. Press ENTER.
Select yes or no. Press ENTER.
Note! User defined materials/fluids will always be displayed in the scroll lists of the program branch
Parameter.
Select Special Funct.\SYSTEM settings\Libraries. Press ENTER.
Select Material list to edit the material scroll list or Medium list to edit the fluid
scroll list.
Select go back to return to SYSTEM settings. Press ENTER.
Select factory if all materials/fluids of the internal database are to be displayed in the scroll
list. An already existing user defined scroll list will not be deleted but only deactivated.
Select user to activate the user defined scroll list. Press ENTER.
If user has been selected, the material or fluid scroll list can be edited (see section
14.5.1...14.5.3).
Save changes
no >YES<
Save changes
no >YES<
Install Material
edit >DELETE<
USER Material
#01: Polystyrol
Really Delete?
no >YES<
SYSTEM settings ↕
Libraries
Libraries ↕
Material list
Material list
factory >USER<
Material list ↕
>Show list
To Next Page
Loading...
Need help?
General
