Need help?Do you have a question about the Flexim FLUXUS F801 and is the answer not in the manual?
General| Pipe Size Range | DN15 to DN6000 |
|---|---|
| Protection Class | IP 67 |
| Power Supply | 24 V DC, 100-240 V AC |
| Measurement Principle | Ultrasonic |
| Measurement Range | 0.01 to 25 m/s |
| Fluid Types | Liquids |
| Temperature Range | -40 °C to 200 °C (Dependent on transducer) |
| Outputs | 4-20 mA, pulse |
| Communication Interfaces | RS-232, RS-485, Modbus |
| Display | LCD |
Contains safety instructions for operating the measuring instrument and for use in potentially explosive atmospheres.
Provides detailed instructions on connecting the transducers, including extension cables and junction boxes.
Details the procedure for connecting the power supply to the transmitter, including safety precautions.
Explains how to connect analog and digital outputs, including specific circuit diagrams and terminal assignments.
Provides detailed instructions for connecting transducers using extension cables and junction boxes.
Details the procedure for connecting the power supply to the transmitter, including safety precautions.
Instructions for connecting transducers specifically for mine applications, including special cable glands.
Details the procedure for connecting the power supply, including specific requirements for ATEX certified systems.
Procedure for initializing the transmitter, including resetting settings and deleting measured values.
Instructions for entering essential pipe parameters like diameter, wall thickness, material, and lining.
Guidance on entering fluid properties such as sound speed, viscosity, density, temperature, and pressure.
Defines how to select the physical quantity and its unit of measurement for display and output.
To Next Page