Flexim FLUXUS F801 User Manual

A Menu Structure FLUXUS ADM 8027, F801, ADM 8127B
UMFLUXUS_F8V4-6-1EN, 2018-10-10 135
A Menu Structure
INIT-resis-
tant
Program branch Parameter
main menu: selection of the program branch Parameter
selection of a measuring channel (A, B) or of a calculation channel (Y, Z)
This display will not be indicated if the transmitter has only one measuring
channel.
When a measuring channel is selected (A, B)
input of the outer pipe diameter
input of the pipe circumference
This display will only be indicated if Special Funct.\SYSTEM set-
tings\Dialogs/Menus\Pipe Circumfer. is activated and Outer Di-
ameter = 0 has been entered.
input of the pipe wall thickness
range: depends on the connected transducers
default: 3 mm
selection of the pipe material
input of the sound speed of the pipe material
range: 600…6553.5 m/s
This display will only be indicated if Other Material is selected.
selection whether the pipe is lined
selection of the lining material
This display will only be indicated if Lining = yes is selected.
input of the sound speed of the lining material
range: 600…6553.5 m/s
This display will only be indicated if Other Material is selected.
input of the liner thickness
range: 0...50 mm
default: 3 mm
input of the roughness of the inner pipe wall
range: 0…5 mm
default: 0.1 mm (for steel as pipe material)
selection of the fluid
input of the average sound speed of the fluid
range: 500...3500 m/s
This display will only be indicated if Other Medium is selected.
>PAR< mea opt sf
Parameter
Parameter ↕
for Channel A:
Outer Diameter
100.0 mm
Pipe Circumfer.
314.2 mm
Wall Thickness
3.0 mm
Pipe Material ↕
Carbon Steel
c-Material
3230.0 m/s
Lining
no >YES<
Lining ↕
Bitumen
c-Material
3200.0 m/s
Liner Thickness
3.0 mm
Roughness
0.4 mm
Medium ↕
Water
c-Medium
1500.0m/s

Flexim FLUXUS F801 Specifications

General

Brand	Flexim
Model	FLUXUS F801
Category	Measuring Instruments
Language	English