FLUXUS ADM 8027, F801, ADM 8127B 4 Description of the Transmitter
18 UMFLUXUS_F8V4-6-1EN, 2018-10-10
4.3 Keyboard
The keyboard consists of 5 keys.
Tab. 4.1: General functions
ENTER confirmation of selection or entered value
BRK + CLR + ENTER RESET: Press these three keys simultaneously to correct a malfunction. The reset has the
same effect as restarting the transmitter. Stored data are not affected.
BRK interruption of the measurement and selection of the main menu
Be careful not to stop a current measurement by inadvertently pressing key BRK!
Tab. 4.2: Navigation
scroll to the right or up through a scroll list
scroll to the left or down through a scroll list
Tab. 4.3: Input of digits
move the cursor to the right
scroll through the digits above the cursor
CLR Move the cursor to the left. If the cursor is on the left margin:
• an already edited value will be reset to the value which was stored previously
• an unedited value will be deleted.
If the entered value is not valid, an error message will be displayed. Press ENTER and enter a
correct value.
Tab. 4.4: Input of text
move the cursor to the right
scroll through the characters above the cursor
CLR reset all characters to the last stored entry
To Next Page
Loading...
Need help?
General
