FLUXUS ADM 8027, F801, ADM 8127B 10 Start-Up of the Transmitter
74 UMFLUXUS_F8V4-6-1EN, 2018-10-10
10.3.3 Navigation
10.4 HotCodes
A HotCode is a key sequence that activates certain functions and settings:
If a vertical arrow ↕ is displayed, the menu item contains a scroll list. The current list item is displayed in the lower line.
Press key and to scroll and select a list item in the lower line. Press
ENTER.
Some menu items contain a horizontal scroll list in the lower line. The selected list item is displayed in angle brackets and
capital letters.
Press key and to scroll and select a list item in the lower line. Press
ENTER.
Some menu items contain a horizontal scroll list in the upper line. The selected list item is displayed in capital letters and
in angle brackets. The current value of the list item is displayed in the lower line.
Press key to scroll and select a list item in the upper line.
Press key to scroll and select a value for the selected list item in the lower
line.
Press ENTER.
function HotCode see section deactivation
language selection 9090xx 10.5
enabling the FastFood mode 007022 13.8.1 HotCode 007022
manual input of the lower limit for the inner pipe diameter 071001 13.10
activating the SuperUser mode 071049 17.1 HotCode 071049
changing the transmission parameters of the RS232 interface 232-0- 14.2.4
resetting the contrast of the display to medium 555000 16.4
Select Special Funct.\SYSTEM settings\Miscellaneous.
Select yes to enter a HotCode.
Enter the HotCode. Press ENTER.
An error message will be displayed if an invalid HotCode has been entered.
Press ENTER.
Select yes to enter the HotCode again or no to return to the menu item Miscellaneous.
Parameter ↕
for Channel A:
R1=FUNC<typ mode
Function: MAX
SYSTEM settings↕
Miscellaneous
Please input a
HOTCODE: 000000
INVALID HOTCODE
HOTCODE: 000000
To Next Page
Loading...
Need help?
General
