FLUXUS G80x 8 Mounting of the Transducers
66 UMFLUXUS_G8V4-6-1EN, 2018-10-10
The cover can be removed from the mounted transducer mounting fixture Variofix C as follows:
• Use a lever tool to remove the cover.
• Insert the lever tool in one of the four openings of the cover (see Fig. 8.47).
• Press the lever tool against the fixture.
• Bend the cover outwards and release it from the anchoring.
• Repeat the steps for the other three openings.
• Remove the cover from the rail.
Fig. 8.47: Removal of the cover
To Next Page
Loading...
