Maintenance
20
5814EN-3
3.8 Inspection – safety devices
Protective and safety devices
Safety devices should be checked at regular intervals.
• Check the protective cover on the cleated chain conveyor return
chain.
• Drive units type H, have a slack protection for the conveyor chain.
Check that the slack protection plates are in place, and that the
chain does not slacken enough to hang below the plates.
• Check the protective cover for the conveyor chain on intermediate
drive units.
• There may be other types of guarding which are specific to your
installation, and these must also be checked. See the system
documentation.
To Next Page
Loading...