Troubleshooting
Created by EBCCW 00:06
27
5814EN-3
4.1 Checklist/maintenance schedule
No. General checks Number of operating hours/time interval See page
1. Check roller chain, sprocket, chain
tension and lubrication of drive unit
50 250 500 Then every 500
hours
page 12
2. Check/adjustment of slip clutch Every 1 000 hours page 10
3. Check conveyor chain guides in drive
units and idler ends
Every 1 000 hours page 12
4. Check tension of conveyor chain 50 250 500 Then every 500
hours
page 14
5. Check slide rails Every 250 hours page 18
6. Check slide rails, conveyor chain
removed.
Every 2 000 hours, or at least once a year page 18
7. Check slide rails in plain bends. Every 500 hours page 18
8. Check safety and security devices At least once a year page 20
To Next Page
Loading...