Installation (FLIR A6xx cameras)
5
2. Go to http://support.flir.com, navigate to the Download section, and then search for
the following software:
• FLIR IP Config
• FLIR IR Camera Player
3. Download and install FLIR IP Config and FLIR IR Camera Player on the computer
that will interface the camera.
4. Use FLIR IP Config to assign an IP address to the camera. Typically, the camera
should be on the same subnet as the computer. For example, if the computer has IP
address 169.254.123.123, the camera can be assigned IP address 169.254.123.124.
5. Use FLIR IR Camera Player to view the video feed from the camera and control it
from the computer.
#T559950; r. AE/83475/83477; en-US
9
To Next Page
Loading...
