Installation (FLIR A6xx cameras)
5
5.1 General information
The following programs are available for download at http://support.flir.com:
• FLIR IP Config: A set-up and configuration program to detect and find FLIR automa-
tion and science cameras on a network and automatically assign or manually set IP
addresses.
• FLIR IR Camera Player: A PC-based remote control and video player for infrared cam-
eras from FLIR Systems.
5.2 System requirements
5.2.1 Operating system
• Microsoft Windows XP Professional, with Service Pack 2 (SP2).
• Microsoft Windows Vista Ultimate 32-bit.
• Microsoft Windows 7, 32-bit and 64-bit.
5.2.2 Hardware
• Personal computer with a 2 GHz 32-bit or 64-bit processor.
• 1 GB of RAM or more.
• 20 GB of hard disk space.
• Super VGA (1024 × 768) or higher-resolution monitor.
• Support for DirectX 9 graphics with:
◦ WDDM driver
◦ 128 MB of graphics memory (minimum)
◦ Pixel Shader 2.0 (in hardware)
◦ 32 bits per pixel.
• DVD-ROM drive.
• Audio output.
• Keyboard and Microsoft mouse, or a compatible pointing device.
5.2.3 Software
Microsoft Internet Explorer 6 or later.
5.2.4 More information
For specific information about system requirements for the operating systems mentioned
above, visit http://www.microsoft.com/windows/.
5.3 Installation
We recommend that you read the read-me files before you install the programs.
Note
• If you experience problems during the installation, visit our Customer Help at http://
support.flir.com.
• You must be an Administrator or a user with Administrative Rights to install the
programs.
• A complete installation consists of several subinstallations, some of which are from
third-party vendors. Do not abort these subinstallations, as they are needed for the
complete installation.
• A complete installation can take up to 10 minutes to complete.
Follow this procedure:
1. Close down all applications.
#T559950; r. AE/83475/83477; en-US
8
To Next Page
Loading...
