FLIR A6751 - Analog Settings

5 –Camera Controller
A6000 and A8500 Series User’s Manual 61
to the A/D stages, there is no detrimental effect on performance from the use of the global gain and
offset controls.
Use of global gain and offset to linearize the camera
5.7.2 Analog Settings
These controls are set at the factory for the focal plane array in the camera. The controls are intended
only for the power user who should consult with FLIR application support before changing these
values.
0
2000
4000
6000
8000
10000
12000
14000
16000
18000
0
2000
4000
6000
8000
10000
12000
14000
16000
18000
Background flux
Typical camera
setup, gain = 1
offset = 0
As linearized
desired operating range