Continuity mode
Sensed voltage > 30 V
Diode mode
Non-contact Voltage De-
tector (NCV)
Low pass filter
MAX, MIN, AVG
readings
Low impedance
mode
Peak MAX/MIN readings
Worklight
Emissivity
Bluetooth
AC signal
Auto Power Off
DC signal
Battery Status
METER POWER
The meter is powered by the supplied TA04 rechargeable battery.
Turn the rotary switch from the OFF position to turn the meter on. If
the meter does not power on, or if a low battery alert appears, re-
place the battery with a fully charged one.
#NAS100145; r. AB/90267/90278; en-GB
5
To Next Page
Loading...
Need help?
General
