Need help?Do you have a question about the FLIR DM166 and is the answer not in the manual?
General| Max Voltage (AC) | 600 V |
|---|---|
| Max Voltage (DC) | 600 V |
| Max Current (AC/DC) | 10 A |
| Resistance Measurement | 40 MΩ |
| Temperature Measurement | Yes |
| Frequency | 10 MHz |
| Data Logging | Yes |
| VFD Mode | Yes |
| Continuity | Yes |
| Diode Test | Yes |
| LoZ Mode | Yes |
| Min/Max/Avg | Yes |
| Bluetooth | No |
| Type | Digital Multimeter |
| Display | LCD |
| IR Resolution | 80 x 60 pixels |
| Emissivity | 0.1 to 1.0 |
| Battery Type | AA |
| Safety Rating | CAT III 600V, CAT IV 300V |
| Accuracy | ±1.5% + 2°C (±2.7°F) |
| Weight | 1.2 lbs (0.54 kg) |
| Warranty | 3-year tool, 10-year detector |
Copyright information for FLIR Systems, Inc. and its products.
Details about the ISO 9001 certification and commitment to continuous development.
Information on how to access the latest manuals and notifications online.
Guidelines for environmentally friendly disposal of electronic equipment.
Crucial safety instructions, warnings, and precautions for operating the device safely.
Important cautions regarding device usage, potential hazards, and symbol meanings.
Lists the primary features and capabilities of the FLIR DM166 multimeter.
Identifies and describes the physical components on the front and rear of the meter.
Details the different positions of the rotary function switch and their corresponding functions.
Explains the operation of meter buttons and specific button sequences.
Describes the meaning of various icons and status indicators shown on the meter display.
Instructions on how to turn the meter on and manage battery status.
Explains the customizable Auto Power OFF feature and its intelligent reset conditions.
How to use auto/manual range modes and understand probe connection alerts.
Covers Out of Range Warning, Data Hold, MIN-MAX-AVG, and Relative Mode.
Information about the optional test lead holder accessory.
Detailed steps for measuring AC/DC voltage, VFD, and frequency.
Instructions for using the non-contact voltage detection feature.
Procedures for performing resistance measurements and continuity tests.
How to perform diode tests and measure capacitance values.
Steps for measuring temperature using a Type K thermocouple.
Detailed steps for measuring current and frequency using test leads.
How to measure current and frequency using a Flex Clamp adaptor.
Introduction to Infrared Guided Measurements, display elements, and basic operation.
Using multimeter functions with IGM and emissivity factors for materials.
General explanation of infrared energy and principles of thermal imaging.
Instructions for cleaning, storage, and replacing the meter's batteries.
Procedure for replacing fuses and guidelines for electronic waste disposal.
Lists general operating conditions, safety ratings, and overload protection.
Details power supply options, included accessories, calibration, and physical dimensions.
Technical specifications for the thermal imager's performance, including range and resolution.
Comprehensive specifications for all electrical measurement functions, covering AC/DC voltage, current, resistance, etc.
Website, email, and phone number for obtaining technical assistance and support.
Outlines the 10-year limited warranty, registration, and coverage terms for FLIR products.
Procedures for warranty repair, replacement, and non-warranty service requests.
To Next Page
