DNR500 Series Series Front Panel
4
4. Arrow Buttons and Dial:
• Arrow Buttons: Press to move cursor in menus. In live view, press up to change
split screen layout; press left / right to select channels when single-channel mode is
selected.
• Dial: In live view, turn left / right to select split-screen layouts.
5. Power Button: Press and hold to power off the system. Press to power the system
back on.
6. IR Receiver and LED Indicators: IR receiver for the remote control. Keep the IR re-
ceiver clear from obstructions.
LED Indicators:
• STATUS: Glows to indicate CPU is in normal state.
• ACT: Flashes when remote control is used.
• POWER: Glows to indicate the system is on.
• Channel Indicators: Flashes slow when channel 1~16 are recording. On 32–chan-
nel models, flashes fast when channels 17~32 are recording. For example, if the
light for channel 1 is flashing fast, it indicates channel 17 is recording. Glows solid
to indicate both corresponding channels (e.g. channel 1 and channel 17 are
recording).
7. IR: Not supported.
#LX400023; r. 2.0/23328/23328; en-US
7
To Next Page
Loading...
