DNR700 Series Front Panel
3
6. IR Receiver and LED Indicators: IR receiver for the remote control. Keep the IR re-
ceiver clear from obstructions.
LED Indicators:
• POWER: Glows to indicate the system is on.
• HDD: Glows to indicate hard drive is in normal state. Turns off when there is a hard
drive error.
• NET: Glows when network is in normal state. Turns off for network error.
• Channel Indicators: Flashes slow when channel 1~16 are recording. On 32–chan-
nel models, flashes fast when channels 17~32 are recording. For example, if the
light for channel 1 is flashing fast, it indicates channel 17 is recording. Glows solid
to indicate both corresponding channels (e.g. channel 1 and channel 17 are
recording).
7. IR: Not supported.
#LX400082; r. 1.0/38226/38226; en-US
6
To Next Page
Loading...
